How do I make a Time Lapse with my XPRO2 / 2+ camera ?

Introduction

Time-lapse photography is a technique whereby the frequency at which frames are captured is much lower than that used to view the sequence. When played at normal speed, time appears to be moving faster and thus lapsing. Here is an example made with the XPRO2 shot in 1080p with a frequency of 1 frame per second.

XPRO2 Time lapse example

Get Set Up

1.Battery

To use the Time Lapse mode the camera must be on for several hours. Make sure your battery is fully charged.You can also use an external battery during the Time lapse recording as shown in the example below.

2. Stability

Please be sure that the camera doesn't move at all during recording. You can use the following accessories to hold the camera still while filming:
o   Helmet Mount
o   Mount 2
o   Clip 1
o Mount 6 and 4

Camera Setup

Setup Time Lapse Video Mode:

1. Go to video settings and select “Time lapse".

2. Select the frequency of image capture: Close/0.5s/1s/2s/5s/10s/30s/60s In the example below 1s has been selected (1 image every second)

Go back to video mode and push the "OK" button. !

Congratulations! You are recording useing time lapse video.